Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 24 items
Waterproof illuminance sensor transmitter current output / Model number MI1LXT-512ASM. Illuminance converter (transmitter) with dustproof and waterproof rating IP65.
MI1LXT-512ASM: Current output type MI1LXT-512VSM: Voltage output type
Waterproof illuminance sensor, battery-free specification (0 to 150,000 lux) / Model number M761APG-PHM100SS
There are various outputs, both analog and digital. This sensor is used to measure the brightness of light as perceived by the human eye and is mainly used in places where lighting is important, such as sports venues, offices, art galleries, museums, and hospitals. It provides accurate measurements of lux illumination under all environmental conditions.
Ideal for replacing CdS cells. Made of silicon phototransistor with built-in optical filter. Characteristics equivalent to human spectral sensitivity.
* It is a top-view type and is the same as the conventional illuminance sensor "CdS cell." * In particular, the PT337P11FA has a lead spacing of 2.4 millimeters, which is the same dimension as the conventional representative "CdS cell." * The spectral sensitivity characteristics have been significantly improved compared to the "CdS cell."
"Brightness and darkness levels" are sensed by the illuminance sensor, which is environmentally friendly and cadmium-free, suitable for large electronic devices as well as portable electronic devices.
■ For mobile devices, there is a surface-mount "chip-type illuminance sensor." ■ For replacing CdS cells, there is a "top-view package illuminance sensor." ■ A versatile "side-view package illuminance sensor." ■ These products have a sensitivity that approximates human visual sensitivity and can generate a large current even in low light, significantly simplifying the design of surrounding circuits (according to our research). ■ The difference in output current due to variations in light sources is small, making these products highly reliable.
We can provide a wide range of proposals tailored to your needs.
The light sensor from New Japan Radio is equipped with a visual sensitivity correction filter. It is less susceptible to infrared interference and has good linearity over a wide range of illuminance (0.1 to 100,000 Lux). It supports a peak sensitivity wavelength of 560 nm, a sensitivity wavelength range of 350 to 650 nm, a photocurrent of 270 nA ± 15%, and an illuminance detection range of 0.1 to 100,000 Lux (conditions: VR=0V, Ta=25°C). 【Product Lineup】 Light Sensor
Equipped with a spectrum response that strictly emulates the human eye!
The "TEMT6000" is a special ambient light detector equipped with a spectral response that closely emulates the human eye. It can detect light density and reflect an analog voltage signal to the Arduino controller. Additionally, it allows you to set voltage level thresholds to trigger other units in your Arduino project. 【Features】 ■ IR sensitivity very close to that of the human eye ■ Scalable output voltage *For more details, please refer to the external link page or feel free to contact us.
![[Development Case] Illuminance Sensor](https://image.mono.ipros.com/public/product/image/68e/2000660618/IPROS24878983951027914920.png?w=280&h=280)
Providing samples with characteristics for evaluation! Feedback on evaluation results in the customer's environment will be used to determine adjustment values!
We were designing a set using an illuminance sensor for a certain manufacturer, but due to the customer's specific optical design requirements, we were unable to achieve the desired light source dependency as intended by the customer. In response, our company produced multiple samples with finely tuned characteristics through small-scale mask modifications. These samples were evaluated by the customer, and an appropriate sample was adopted as a mass-produced product under the customer's environment. As a result, we were able to meet the customer's required sensitivity specifications and light source dependency through small-scale mask modifications, thereby minimizing additional costs. [Effects] ■ We were able to meet the customer's required sensitivity specifications and light source dependency through small-scale mask modifications, minimizing additional costs. ■ We were also able to standardize many parts of the mass production process, further minimizing additional costs in production. *For more details, please refer to the PDF document or feel free to contact us.
The main parameters of the EMDC can be configured using the built-in NFC interface!
The "Human Presence & Illuminance Sensor" is a sensor module that uses a passive infrared (PIR) sensor to detect human movement and can measure illuminance with an illuminance sensor. The main parameters of the EMDC can be set using the built-in NFC interface. Please feel free to contact us if you have any inquiries. 【Features】 ■ Human presence sensor equipped with an illuminance sensor ■ Main parameters of the EMDC can be set using the built-in NFC interface *For more details, please refer to the related links or feel free to contact us.
No setup required! Ready-to-use DALI presence and illuminance sensor Minimum configuration: 1) DALI BUS 2) Sensor + Switch 3) DALI-2 lighting fixture
We would like to introduce the "DALI-2 Human Detection and Illuminance Sensor with Switch Input Input Device" that we handle. This device is compatible with PIR motion sensors and is equipped with illuminance measurement functionality and DALI-2 switch input. It can be used as a DALI-2 switch with the "single-pole" and "push button" sold in Japan. With the built-in application controller, you can set up motion linkage, multi-location detection, daylight utilization control, appropriate illuminance control, and lighting + human detection sensor control. 【Features】 ■ Detection range: 24 meters in diameter at a ceiling height of 10 m ■ DALI current consumption: 2 mA ■ Diameter: 55 mm, installation hole: φ57 – 67 mm ■ DALI signal sending terminal block included ■ Can be used as a DALI-2 switch with separately sold "single-pole" and "push button" available in Japan ■ Green LED indicator for visually identifying the sensor's position ■ Settings can be configured using DALI-2 software or RAPIX software *For more details, please download the PDF or feel free to contact us.
DALI-2 waterproof sensor compatible with motion detection sensor equipped with illuminance measurement and DALI-2 switch input.
We would like to introduce the "DALI-2 Waterproof Motion and Illumination Sensor with Switch Input" that we handle. It is compatible with PIR motion sensors equipped with illumination measurement functions and DALI-2 switch input. It can be used as a DALI-2 switch with the "single-pole" and "push button" sold in Japan. With the built-in application controller, you can set up motion linkage, multi-location detection, daylight utilization control, appropriate illumination control, and light + motion sensor control. 【Features】 ■ Detection range: 24 meters in diameter at a ceiling height of 10 m ■ DALI consumption current: 2 mA ■ Diameter: 55 mm, installation hole: φ57 – 67 mm ■ DALI signal terminal block included ■ Can be used as a DALI-2 switch with separately sold "single-pole" and "push button" available in Japan ■ Green LED indicator for visually identifying the sensor's position ■ Settings can be configured using DALI-2 software or RAPIX software *For more details, please download the PDF or feel free to contact us.
Installed ultraviolet radiation intensity sensor
It measures the irradiance (W/m²), defined as the ratio of the radiation flux (W) incident on a surface to the unit area (m²), in the UVA / UVB / UVC spectral range. With the adoption of a new photodiode, it is insensitive to ? and infrared light. The outdoor installation type is the MC8P-PHOT3S series. ■mV signal output In the spectral regions of VIS-NIR, UVA, UVB, and UVC, it measures light and radiation amounts as illuminance (lux) or irradiance (W/m²). Additionally, it is capable of measuring the number of photons per unit time and unit area in the photosynthetically active radiation (PAR) wavelength range of 400–700 nm. The WPLP series does not require an external power supply.
We measure illuminance (lux), defined as the ratio of luminous flux (lumens) incident on a surface to the unit area (m²).
The spectral response curve of the light measurement probe approximates the human eye's response curve known as the standard photopic curve V(λ). The difference between the "WPLP-PHOT-01" in spectral response and the standard photopic curve V(λ) is calculated as the error f'1. Calibration of the probe is performed by comparing it with a photometer that has been calibrated by a primary metrology standard institution. The calibration procedure complies with CIE Document No. 69 (1987) "Method of Characterizing Illuminance Meters and Luminance Meters." Measurements are conducted by illuminating the probe with standard light A. The outdoor installation type is the MC8P-PHOT3S series.
It is a light sensor (brightness sensor) with a chip type and lead pin type package that has the same spectral sensitivity as the human eye.
- It has the same spectral sensitivity as human visual sensitivity. - A linear output current can be obtained in response to changes in incident light intensity. - The difference in output current due to variations in light sources is small. - A large output current can be obtained even in low illumination. - We offer a convenient lead pin type that can replace CdS cells. - It is compatible with lead-free solder.
A light sensor suitable for applications in illuminance control and microclimate observation!
The "PCL-01B" is suitable for applications in illuminance control and microclimate observation, and it is an economically efficient illuminance sensor. The sensing element has a high spectral sensitivity characteristic due to the combination of a silicon sensor and optical filters. The diffusion plate used for light capture accurately captures illuminance. Calibration is performed through comparative testing with a standard illuminance meter. 【Features】 ■ Excellent cost-effectiveness ■ Sensing element combines silicon sensor and optical filters ■ High spectral sensitivity characteristic ■ Diffusion plate accurately captures illuminance ■ Calibration is performed through comparative testing with a standard illuminance meter *For more details, please refer to the PDF document or feel free to contact us.
